NSN 3020-00-910-8394 · NIIN 009108394 · FSC 3020
NO DASHES 3020009108394
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWNH | TOOTH FORM | STUB |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.250 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | COUNTERBORE FIRST END INCHES 0.693 |
| CWWN | END NOMINAL DIAMETER | SECOND END INCHES 0.529 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.410 |
| CWXB | FIRST STEP NOMINAL DIAMETER | SECOND END INCHES 0.870 |
| FEAT | SPECIAL FEATURES | BORE OF 1ST HUB END SPLINED,0.550 IN. MIN.,0.555 IN. MAX MINOR DIA,0.685 IN. MIN,0.705 IN. MAX MAJOR DIA,0.600 PITCH DIA.,30 DEG PRESSURE ANGLE,12 STUB TEETH |
| MATT | MATERIAL | OVERALL STEEL |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.800 |
| ANTP | BORE STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 25.0 AND ROCKWELL C MAXIMUM 32.0 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTB | COUNTERBORE NOMINAL DEPTH | COUNTERBORE FIRST END INCHES 0.525 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.9286 |
| AJLA | TEETH QUANTITY | 41 |
| STYL | STYLE DESIGNATOR | |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.660 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.580 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.240 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.393 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6470 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.071 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 80888 | 11599 |