NSN 3020-00-912-3510 · NIIN 009123510 · FSC 3020
NO DASHES 3020009123510
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 1.6825 |
| CWWC | CLAMPING SURFACE NOMINAL LENGTH | FIRST END INCHES 1.3800 |
| SFTT | SURFACE TREATMENT | HUB COPPER |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.2375 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE FED STD 66 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.9100 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL A MINIMUM 76.0 AND ROCKWELL A MAXIMUM 81.0 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.0080 |
| CWTR | HUB STYLE DESIGNATOR | |
| ANTP | BORE STYLE | |
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 4 |
| MATT | MATERIAL | OVERALL STEEL COMP 8620 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 1.865 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.333 |
| STYL | STYLE DESIGNATOR | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.0000 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AJLA | TEETH QUANTITY | 11 |
| FEAT | SPECIAL FEATURES | COUNTERBORE SECOND END; COUNTERBORE DEPTH 1.2005; DIA. 1.2070 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIINs 003636053 · 004164102. An older drawing citing one of those numbers resolves here.