NSN 3020-00-919-7461 · NIIN 009197461 · FSC 3020
NO DASHES 3020009197461
In Stock
GEAR,ANTIBACKLASH,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.188 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.583 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.125 |
| CWTR | HUB STYLE DESIGNATOR | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 8,T4 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.188 |
| AJLA | TEETH QUANTITY | 150 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.104 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.5625 |
| CWNH | TOOTH FORM | STANDARD |
| FEAT | SPECIAL FEATURES | 1ST END HUB TERMINATES INTO RECTANGULAR SPLIT CLAMPING DEVICE,0.216 IN.W BY 0.531 IN. LG BY 0.250 IN. HT,W/2 THD CLAMPING HOLES |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 6061 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 0.250 |
| STYL | STYLE DESIGNATOR | |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.078 |