NSN 3020-00-942-3090 · NIIN 009423090 · FSC 3020
NO DASHES 3020009423090
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWRM | FACE NOMINAL WIDTH | INCHES 0.150 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL STD SINGLE TREATMENT RESPONSE -IL-STD-171,FINISH NO. 5.4.1 |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.5000 |
| CWWS | FIRST STEP NOMINAL LENGTH | SECOND END INCHES 0.177 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.156 |
| CWNH | TOOTH FORM | STANDARD |
| AJLA | TEETH QUANTITY | 48 |
| STYL | STYLE DESIGNATOR | |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.093 |
| CWWN | END NOMINAL DIAMETER | SECOND END INCHES 0.124 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.518 |
| CWTR | HUB STYLE DESIGNATOR | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7720,CO- 303,COND A |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.353 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.281 |
| CWXB | FIRST STEP NOMINAL DIAMETER | SECOND END INCHES 0.187 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.249 |
| CWWH | END NOMINAL LENGTH | BOTH ENDS INCHES 0.104 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 102211 | 10138 |