NSN 3020-00-948-0439 · NIIN 009480439 · FSC 3020
NO DASHES 3020009480439
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJLA | TEETH QUANTITY | 60 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.237 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.096 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.349 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.760 |
| MATT | MATERIAL | OVERALL STEEL COMP 440C |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5630 |
| ANTP | BORE STYLE | |
| AAQL | BODY STYLE | |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.518 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.8564 |
| CQFM | HARDNESS RATING | HUB ROCKWELL C MINIMUM 32.0 AND ROCKWELL C MAXIMUM 36.0 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C MINIMUM 32.0 AND ROCKWELL C MAXIMUM 36.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.917 |
| CWNH | TOOTH FORM | STANDARD |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.281 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.590 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| STYL | STYLE DESIGNATOR |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| A3170 | 12511 |