NSN 3020-00-948-1021 · NIIN 009481021 · FSC 3020
NO DASHES 3020009481021
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.190 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 6,T4 |
| SFTT | SURFACE TREATMENT | OVERALL ANODIZE |
| CWTR | HUB STYLE DESIGNATOR | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.060 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END PLAIN 2 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.122 |
| AAQL | BODY STYLE | |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.062 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.0830 |
| AJLA | TEETH QUANTITY | 52 |
| ANTP | BORE STYLE | |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.250 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.380 |
| CWNH | TOOTH FORM | STANDARD |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.130 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 11-0783 | 93712 |