NSN 3020-00-948-5148 · NIIN 009485148 · FSC 3020
NO DASHES 3020009485148
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.398 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.375 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.187 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7493,CO- 4620 |
| SFTT | SURFACE TREATMENT | OVERALL PHOSPHATE |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.1641 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.064 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 1.3730 AND INCHES MAXIMUM 1.3750 |
| AJLA | TEETH QUANTITY | 66 |
| STYL | STYLE DESIGNATOR | |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.2504 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| MATT | MATERIAL | OVERALL STEEL COMP 4620 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C NOMINAL 45.0 |
| ANTP | BORE STYLE | |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.063 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 53763 | 98889 |