NSN 3020-00-953-2091 · NIIN 009532091 · FSC 3020
NO DASHES 3020009532091
In Stock
GEAR CLUSTER
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
4 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQCF | CONSTRUCTION | ASSEMBLED |
| FEAT | SPECIAL FEATURES | FIRST END LENGTH:0.186 IN.NOM;SECOND END LENGTH:0.175 IN.NOM;HUB LOCATION:BOTH ENDS;FIRST END HUB DIA:0.0935 IN.NOM;SECOND END HUB DIA:0.0935 IN.NOM;FIRST END HUB LENGTH:0.0650 IN.NOM;SECOND END HUB LENGTH:0.0650 IN.NOM;FIRST END FIRST STEP DIA:0.122 IN.NOM;SECOND END FIRST STEP DIA:0.122 IN.NOM;FIRST END LENGTH OF FIRST STEP:0.121 IN.NOM;SECOND END LENGTH OF FIRST STEP:0.120 IN.NOM;DIA OF HUB BETWEEN FIRST AND SECOND GEAR:0.100 IN.NOM;LENGTH OF HUB BETWEEN FIRST AND SECOND GEAR:0.164 IN.NOM;FIRST AND SECOND GEAR TYPE:SPUR;FIRST GEAR OUTSIDE DIA:0.766 IN.NOM;SECOND GEAR OUTSIDE DIA:0.102 IN.NOM;FIRST GEAR PITCH DIA:0.750 IN.NOM;SECOND GEAR PITCH DIA:0.1379 IN.NOM;FIRST GEAR WIDTH OF FACE:0.035 IN.NOM;SECOND GEAR WIDTH OF FACE:0.120 IN.NOM;FIRST AND SECOND GEAR ANGLE PRESSURE DEGREES 20;FIRST GEAR TEETH QTY:90;SECOND GEAR TEETH QTY:13;FIRST GEAR PITCH IN INCHES:0.02618 IN.NOM;SECOND GEAR PITCH IN INCHES:0.03272 IN.NOM;O/A GEAR CLUSTER LENGTH:0.572 IN.NOM |
| MATT | MATERIAL | SHAFT/HUB STEEL COMP 303 |
| SFTT | SURFACE TREATMENT | SHAFT/HUB PASSIVATE |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 102680 | 10138 |