NSN 3020-00-957-6594 · NIIN 009576594 · FSC 3020
NO DASHES 3020009576594
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABSX | ATTACHMENT METHOD | CLAMP |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.187 |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.250 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.4990 AND INCHES MAXIMUM 0.5000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7720,CO- 303S |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STYL | STYLE DESIGNATOR | |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.249 |
| AJLA | TEETH QUANTITY | 40 |
| AAQL | BODY STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.524 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.406 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.281 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.031 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.313 |