NSN 3020-00-962-0183 · NIIN 009620183 · FSC 3020
NO DASHES 3020009620183
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.686 |
| CWWN | END NOMINAL DIAMETER | SECOND END INCHES 0.984 |
| CWWS | FIRST STEP NOMINAL LENGTH | SECOND END INCHES 0.250 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWXB | FIRST STEP NOMINAL DIAMETER | SECOND END INCHES 1.110 |
| CWXG | SECOND STEP NOMINAL LENGTH | FIRST END INCHES 0.250 |
| CWXL | SECOND STEP NOMINAL DIAMETER | FIRST END INCHES 1.111 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 5.1250 |
| AJLA | TEETH QUANTITY | 82 |
| ANTP | BORE STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 28.0 AND ROCKWELL C MAXIMUM 32.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 5.250 |
| CWWH | END NOMINAL LENGTH | SECOND END INCHES 0.480 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.938 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.480 |
| SFTT | SURFACE TREATMENT | OVERALL OXIDE |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 1.416 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.728 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.250 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-13924,CLASS 1 |
| STYL | STYLE DESIGNATOR | |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.984 |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-624 |