NSN 3020-00-968-8570 · NIIN 009688570 · FSC 3020
NO DASHES 3020009688570
In Stock
GEAR,BEVEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQFM | HARDNESS RATING | BODY ROCKWELL SUPERFICIAL 15-N MINIMUM 89.0 AND ROCKWELL SUPERFICIAL 15-N MAXIMUM 91.5 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.250 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.390 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.840 |
| FEAT | SPECIAL FEATURES | COUNTERBORE BOTH ENDS,0.812 IN.AND 0.406 IN.DIA; 0.130 IN. AND 1.310 IN.DEEP |
| MATT | MATERIAL | OVERALL STEEL UNS K24065 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S6470 |
| SFTT | SURFACE TREATMENT | OVERALL OXIDE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-F-13924,CLASS 1,GRADE 1A |
| STYL | STYLE DESIGNATOR | |
| CWQD | PITCH ANGLE | DEGREES 64.9166 |
| CWTR | HUB STYLE DESIGNATOR | |
| ANTP | BORE STYLE | |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.3542 |
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 17 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.8217 |
| AJLA | TEETH QUANTITY | 47 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 1.750 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 2.250 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CBBL | FEATURES PROVIDED | STRAIGHT TEETH |