NSN 3020-00-981-9228 · NIIN 009819228 · FSC 3020
NO DASHES 3020009819228
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGJS | PITCH DIAMETER | INCHES NOMINAL 3.3750 |
| ABSA | SPLINE QUANTITY | 17 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.038 |
| STYL | STYLE DESIGNATOR | |
| ANTP | BORE STYLE | |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.5312 |
| CQFM | HARDNESS RATING | HUB ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 40.0 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL A MINIMUM 79.0 AND ROCKWELL A MAXIMUM 85.0 |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.172 |
| MATT | MATERIAL | OVERALL STEEL COMP E9310 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6260 |
| AAQL | BODY STYLE | |
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 1.120 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.460 |
| AJLA | TEETH QUANTITY | 54 |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.318 |
| CWNH | TOOTH FORM | STANDARD |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.549 |
| CWTR | HUB STYLE DESIGNATOR | |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END PLAIN 3 |
| CWPP | PRESSURE ANGLE | DEGREES 22.5000 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.180 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.100 |