NSN 3020-00-993-5743 · NIIN 009935743 · FSC 3020
NO DASHES 3020009935743
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-764,TYE 303,COND A |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR QUALITY NUMBER 11 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.219 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.375 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.7334 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.7021 AND INCHES MAXIMUM 0.7031 |
| AJLA | TEETH QUANTITY | 45 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.187 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.188 |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STYL | STYLE DESIGNATOR | |
| CWNH | TOOTH FORM | STANDARD |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GP32-45P1 | 23266 |
| P64S21-45 | 29440 |
| 7147-1006P1 | 3B150 |
| 7147-1006P1 | 49956 |
| 7147-1006P1 | 54X10 |
| G15-45 | 00141 |
| E31-45P1 | 00328 |
| D66S45P1 | 12444 |