NSN 3020-00-997-6115 · NIIN 009976115 · FSC 3020
NO DASHES 3020009976115
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END PLAIN 4 |
| CQFM | HARDNESS RATING | OVERALL BRINELL STANDARD MINIMUM 255.0 AND BRINELL STANDARD MAXIMUM 293.0 |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.9399 |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.125 AND INCHES 0.188 |
| FEAT | SPECIAL FEATURES | MTG HOLES 90DEGS APART |
| MATT | MATERIAL | OVERALL STEEL |
| SFTT | SURFACE TREATMENT | OVERALL PHOSPHATE |
| STYL | STYLE DESIGNATOR | |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.625 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.491 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.753 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.449 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.055 |
| AJLA | TEETH QUANTITY | 13 |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | LEFT |
| AAQL | BODY STYLE | |
| CWPZ | HELIX ANGLE | DEGREES 30.1833 |