NSN 3020-00-998-2890 · NIIN 009982890 · FSC 3020
NO DASHES 3020009982890
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWTR | HUB STYLE DESIGNATOR | |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.093 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.285 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.916 |
| CWNH | TOOTH FORM | STANDARD |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 6061 |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 1.8740 AND INCHES MAXIMUM 1.8750 |
| AJLA | TEETH QUANTITY | 90 |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | CLAMP |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR QUALITY NUMBER 11 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 8,T6 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.250 |
| CWWC | CLAMPING SURFACE NOMINAL LENGTH | FIRST END INCHES 0.245 |
| ANTP | BORE STYLE | |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.187 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 45-037-90 | 56232 |
| 5-037 | 62324 |
| 1412582 | 10001 |
| 1412582-90 | 10001 |