NSN 3020-00-999-2802 · NIIN 009992802 · FSC 3020
NO DASHES 3020009992802
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJLA | TEETH QUANTITY | 20 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 1 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.630 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.406 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 0.180 |
| ANTP | BORE STYLE | |
| CWTR | HUB STYLE DESIGNATOR | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 6 T351 |
| SFTT | SURFACE TREATMENT | OVERALL ANODIZE |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 40 |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.112 |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.5892 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.010 |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | LEFT |
| AAQL | BODY STYLE | |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.177 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.125 |
| STYL | STYLE DESIGNATOR | |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.219 |
| CWPZ | HELIX ANGLE | DEGREES 45.0000 |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.375 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 2024 |