NSN 3020-01-004-9738 · NIIN 010049738 · FSC 3020
NO DASHES 3020010049738
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | CLAMP |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.1250 |
| AJLA | TEETH QUANTITY | 72 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.156 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.175 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.250 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.313 |
| CWWC | CLAMPING SURFACE NOMINAL LENGTH | FIRST END INCHES 0.125 |
| FEAT | SPECIAL FEATURES | THREE 0.162 IN. DIA HOLES ON 0.880 IN. DIA CIRCLE EQUALLY SPACED,ONE 0.124 IN. DIA HOLE ON 0.862 IN. DIA CIRCLE 2 DEG OFF CENTER BETWEEN 2 HOLES ON 0.880 IN. CIRCLE AND SCRIBE MARK 20 DEG FROM 0.124 IN. DIA HOLE |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| STYL | STYLE DESIGNATOR |