NSN 3020-01-013-4814 · NIIN 010134814 · FSC 3020
NO DASHES 3020010134814
In Stock
GEAR,BEVEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.0000 |
| AJLA | TEETH QUANTITY | 32 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | STRAIGHT TEETH |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.148 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.763 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQD | PITCH ANGLE | DEGREES 26.5665 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | BOTH ENDS INCHES 0.213 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.200 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.787 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.096 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.448 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 1.130 |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.250 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 1.130 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.045 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 1.137 |
| FEAT | SPECIAL FEATURES | SECOND END HUB HEX SHAPED,1.815 IN.WIDTH ACROSS FLATS |
| MATT | MATERIAL | OVERALL STEEL |
| STYL | STYLE DESIGNATOR |