NSN 3020-01-020-5546 · NIIN 010205546 · FSC 3020
NO DASHES 3020010205546
In Stock
GEAR,WORM WHEEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 16.5330 |
| AJLA | TEETH QUANTITY | 53 |
| ALPN | FACE TYPE | CONCAVE |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 17.375 |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPL | MATING THREAD LEAD QUANTITY | 2 |
| CWPP | PRESSURE ANGLE | DEGREES 25.0000 |
| CWPZ | HELIX ANGLE | DEGREES 10.1999 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | BOTH ENDS INCHES 1.750 |
| CWRM | FACE NOMINAL WIDTH | INCHES 2.500 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 4.375 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 1.000 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 2.629 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 6.750 |
| MATT | MATERIAL | TEETH COPPER ALLOY |
| MATT | MATERIAL | HUB IRON CAST |
| STYL | STYLE DESIGNATOR |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 100G195-261/2 | 59958 |
| 100G-195 | 59958 |
| 616F375 | 90099 |
| 616F375H40 | 90099 |