NSN 3020-01-045-6271 · NIIN 010456271 · FSC 3020
NO DASHES 3020010456271
In Stock
GEAR,WORM
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.4990 AND INCHES MAXIMUM 0.5000 |
| ALPN | FACE TYPE | STRAIGHT |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.531 |
| CWPC | THREAD FORM QUANTITY | 1 |
| CWPH | THREAD FORM DIRECTION | RIGHT-HAND |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWPZ | HELIX ANGLE | DEGREES 1.7831 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.500 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 1.062 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.750 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.688 |
| CWWH | END NOMINAL LENGTH | SECOND END INCHES 0.250 |
| CWWN | END NOMINAL DIAMETER | BOTH ENDS INCHES 0.125 |
| CWWS | FIRST STEP NOMINAL LENGTH | SECOND END INCHES 0.250 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.375 |
| CWXB | FIRST STEP NOMINAL DIAMETER | BOTH ENDS INCHES 0.188 |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-764 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35,TYE 1 |
| STYL | STYLE DESIGNATOR |