NSN 3020-01-075-9203 · NIIN 010759203 · FSC 3020
NO DASHES 3020010759203
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.4295 AND INCHES MAXIMUM 0.4455 |
| AJLA | TEETH QUANTITY | 35 |
| ANTP | BORE STYLE | |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | AXIALLY THROUGH HUB FIRST END UNF |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 80 |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | AXIALLY THROUGH HUB FIRST END INCHES 0.060 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | AXIALLY THROUGH HUB FIRST END THREADED 1 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.462 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.265 |
| CWNH | TOOTH FORM | STUB |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.010 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.210 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.045 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.094 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 0.130 |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.008 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.130 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.008 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.250 |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 7075 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 9,T6 |
| STYL | STYLE DESIGNATOR |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 778-0350-001 | 13499 |