NSN 3020-01-077-1359 · NIIN 010771359 · FSC 3020
NO DASHES 3020010771359
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | CLAMP |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.1875 |
| AJLA | TEETH QUANTITY | 95 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.2125 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.124 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.242 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.040 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.121 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 0.188 |
| CWWC | CLAMPING SURFACE NOMINAL LENGTH | FIRST END INCHES 0.137 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 9 |
| CWXY | FIRST GROOVE NOMINAL WIDTH | SECOND END INCHES 0.036 |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | SECOND END INCHES 0.172 |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | SECOND END INCHES 0.023 |
| FEAT | SPECIAL FEATURES | FIRST END HAS A FLANGE,0.191 IN. OD,0.020 IN. W,ON HUB END; ALSO GEAR BODY HAS A COUNTERSUNK HOLE,0.031 IN. DIA,0.040 IN. DEEP,ON 0.510 IN. DIA BOLT CIRCLE |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY |
| SFTT | SURFACE TREATMENT | OVERALL ANODIZE |
| STYL | STYLE DESIGNATOR |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 797-1071 | 13499 |
| 797-1071-001 | 13499 |