NSN 3020-01-078-3708 · NIIN 010783708 · FSC 3020
NO DASHES 3020010783708
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| AJLA | TEETH QUANTITY | 40 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.525 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.187 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.125 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.312 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 14 |
| FEAT | SPECIAL FEATURES | MTG HOLES 90 DEGS APART |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-764,TYE 303 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL STD SINGLE TREATMENT RESPONSE -IL-STD-171,FINISH NO. 5.4.1 |
| STYL | STYLE DESIGNATOR | |
| TMQY | FURNISHED ITEMS AND QUANTITY | SETSCREW 1 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GP46-40P3 | 23266 |
| 804651 | 96214 |
| 804651-1040 | 96214 |
| B24-40-P3 | 00328 |
| G45-40-Q14 | 00141 |
| F44S40P3 | 12444 |
Supersedes
This item replaces cancelled NIIN 009263902. An older drawing citing one of those numbers resolves here.