NSN 3020-01-091-4358 · NIIN 010914358 · FSC 3020
NO DASHES 3020010914358
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.3125 |
| AJLA | TEETH QUANTITY | 15 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.492 |
| CWNH | TOOTH FORM | SPECIAL |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | BOTH ENDS INCHES 0.656 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.562 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.562 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.125 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.343 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | BOTH ENDS INCHES 0.625 |
| CWWN | END NOMINAL DIAMETER | BOTH ENDS INCHES 0.995 |
| CWWS | FIRST STEP NOMINAL LENGTH | BOTH ENDS INCHES 0.031 |
| CWXB | FIRST STEP NOMINAL DIAMETER | BOTH ENDS INCHES 1.125 |
| MATT | MATERIAL | OVERALL STEEL |
| STYL | STYLE DESIGNATOR |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CB27320-001 | 07270 |
| 14-29040ITEM1 | 07270 |
| 23213 | 07270 |