NSN 3020-01-094-3106 · NIIN 010943106 · FSC 3020
NO DASHES 3020010943106
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 3.7500 |
| AJLA | TEETH QUANTITY | 45 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.883 |
| CWNH | TOOTH FORM | STUB |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | BOTH ENDS INCHES 0.030 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.061 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.189 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.251 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.735 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 1.750 |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 400 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-N-281,CLASS A |
| STYL | STYLE DESIGNATOR |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 709-4684879 ITEM 4 | 80064 |
| 709-4684879 | 80064 |
| 87832-1608-ITEM 4 | 96169 |
| 87832-1608 ITEM4 | 96165 |
Supersedes
This item replaces cancelled NIIN 011513263. An older drawing citing one of those numbers resolves here.