NSN 3020-01-096-0712 · NIIN 010960712 · FSC 3020
NO DASHES 3020010960712
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 39 |
| ABSX | ATTACHMENT METHOD | INTERNAL RING GROOVE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 6.4170 |
| AJLA | TEETH QUANTITY | 77 |
| ANTP | BORE STYLE | |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 1.2188 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C NOMINAL 30.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 6.583 |
| CWNH | TOOTH FORM | SPECIAL |
| CWPP | PRESSURE ANGLE | DEGREES 25.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | BOTH ENDS INCHES 1.478 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.802 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.275 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 1.838 |
| CWXY | FIRST GROOVE NOMINAL WIDTH | BOTH ENDS INCHES 0.376 |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | BOTH ENDS INCHES 1.620 |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | BOTH ENDS INCHES 0.275 |
| FEAT | SPECIAL FEATURES | ONE COUNTERBORE EACH END,BOTH 1.420 IN.DIA AND 1.000 IN.DEEP |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 010378580. An older drawing citing one of those numbers resolves here.