NSN 3020-01-099-4811 · NIIN 010994811 · FSC 3020
NO DASHES 3020010994811
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.2083 |
| AJLA | TEETH QUANTITY | 20 |
| ANTP | BORE STYLE | |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 56 |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.086 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 2 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.229 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.281 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.181 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.100 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.125 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.313 |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-764,TYE 303,COND A |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL STD SINGLE TREATMENT RESPONSE -IL-STD-171,FINISH NO. 5.4.1 |
| STYL | STYLE DESIGNATOR |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 116460 | 10138 |