NSN 3020-01-101-4667 · NIIN 011014667 · FSC 3020
NO DASHES 3020011014667
In Stock
GEAR,ANTIBACKLASH,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABSX | ATTACHMENT METHOD | CLAMP |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 1.4990 AND INCHES MAXIMUM 1.5000 |
| AJLA | TEETH QUANTITY | 180 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.5160 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.281 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.104 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.125 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.188 |
| CWWC | CLAMPING SURFACE NOMINAL LENGTH | FIRST END INCHES 0.250 |
| MATT | MATERIAL | BODY ALUMINUM ALLOY 2024 |
| MATT | MATERIAL | HUB STEEL COMP 303 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BODY FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 6,T4 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | HUB FED STD SINGLE MATERIAL RESPONSE 66,SAE 30303 |
| SFTT | SURFACE TREATMENT | BODY ANODIZE |
| SFTT | SURFACE TREATMENT | HUB PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BODY MIL SPEC SINGLE TREATMENT RESPONSE -IL-A-8625,T2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | HUB MIL STD SINGLE TREATMENT RESPONSE -IL-STD-171,FINISH NO. 5.4.1. |
| STYL | STYLE DESIGNATOR |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 530402 | 96214 |
| 530402-2 | 96214 |
| P12-180-C-S-1200 | 00141 |
| P-12-9-180-C-S-1200B | 00141 |