NSN 3020-01-114-6022 · NIIN 011146022 · FSC 3020
NO DASHES 3020011146022
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Application: N2 FLYBALL GOVERNOR
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AGAV | END ITEM IDENTIFICATION | N2 FLYBALL GOVERNOR |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.7500 |
| AJLA | TEETH QUANTITY | 18 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.857 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.105 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.140 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.095 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.250 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.066 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.187 |
| CWTB | COUNTERBORE NOMINAL DEPTH | FIRST END INCHES 0.050 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | FIRST END INCHES 0.355 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 0.400 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.553 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR |