NSN 3020-01-262-7668 · NIIN 012627668 · FSC 3020
NO DASHES 3020012627668
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 5.2000 |
| AJLA | TEETH QUANTITY | 26 |
| ANTP | BORE STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL SUPERFICIAL 15-N MINIMUM 78.5 AND ROCKWELL SUPERFICIAL 15-N MAXIMUM 81.5 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 5.506 |
| CWNH | TOOTH FORM | SPECIAL |
| CWPP | PRESSURE ANGLE | DEGREES 27.5000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | BOTH ENDS INCHES 0.125 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.188 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.441 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.127 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.285 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 0.938 |
| MATT | MATERIAL | OVERALL STEEL COMP 1018 OR STEEL COMP 1117 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 82430 | 52304 |