NSN 3020-01-294-5405 · NIIN 012945405 · FSC 3020
NO DASHES 3020012945405
In Stock
GEAR,BEVEL
Gears, Pulleys, Sprockets, and Transmission Chain
Application: F112 ENGINE
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AGAV | END ITEM IDENTIFICATION | F112 ENGINE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.2778 |
| AJLA | TEETH QUANTITY | 23 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SPIRAL |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.333 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.280 |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQD | PITCH ANGLE | DEGREES 50.4375 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.110 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.235 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.400 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.095 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.223 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.620 |
| MATT | MATERIAL | OVERALL STEEL COMP E9310 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S6265 |
| STYL | STYLE DESIGNATOR |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 43282 | 24235 |