NSN 3020-01-318-8500 · NIIN 013188500 · FSC 3020
NO DASHES 3020013188500
In Stock
GEAR,BEVEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 6 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 3.0000 |
| AJLA | TEETH QUANTITY | 30 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | STRAIGHT TEETH |
| CQFM | HARDNESS RATING | OVERALL BRINELL STANDARD MINIMUM 235.0 AND BRINELL STANDARD MAXIMUM 311.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.141 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.578 |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWQD | PITCH ANGLE | DEGREES 45.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 1.125 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.574 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.250 |
| CWTB | COUNTERBORE NOMINAL DEPTH | SECOND END INCHES 0.250 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | SECOND END INCHES 1.266 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 2.188 |
| MATT | MATERIAL | OVERALL STEEL |
| STYL | STYLE DESIGNATOR |