NSN 3020-01-364-8818 · NIIN 013648818 · FSC 3020
NO DASHES 3020013648818
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 40.0000 |
| AJLA | TEETH QUANTITY | 100 |
| ANTP | BORE STYLE | |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C MINIMUM 54.0 AND ROCKWELL C MAXIMUM 58.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 40.640 |
| CWNH | TOOTH FORM | STUB |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 4.500 |
| CWRM | FACE NOMINAL WIDTH | INCHES 5.500 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 7.000 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 1.000 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 4.000 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 11.250 |
| MATT | MATERIAL | OVERALL STEEL |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 5D3-02205 | 34712 |
| 5D3-02205 ITEM NO 3 | 34712 |
| 1147772 | 34712 |
| PL 5D3-02205 | 34712 |