NSN 3020-01-384-6481 · NIIN 013846481 · FSC 3020
NO DASHES 3020013846481
In Stock
GEAR,WORM WHEEL
Gears, Pulleys, Sprockets, and Transmission Chain
Application: AMERICAN MECHANICAL AND ELECTRONIC SERVICE LCAC POTENTIOMETER FEED BACK BOW THRUSTER
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AGAV | END ITEM IDENTIFICATION | AMERICAN MECHANICAL AND ELECTRONIC SERVICE LCAC POTENTIOMETER FEED BACK BOW THRUSTER |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.6670 |
| AJLA | TEETH QUANTITY | 40 |
| ALPN | FACE TYPE | CONCAVE |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.817 |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWNP | THROAT NOMINAL RADIUS | INCHES 0.250 |
| CWNW | MATING PITCH DIAMETER | INCHES NOMINAL 0.5000 |
| CWPP | PRESSURE ANGLE | DEGREES 25.0000 |
| CWPZ | HELIX ANGLE | DEGREES 0.5236 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.500 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.375 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.375 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.750 |
| MATT | MATERIAL | OVERALL BRONZE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-B-626,ALLOY 464 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| W24B35-F40 | 29440 |
| AMES-3108 | 59114 |
| AMES-3108-E PC 27 | 59114 |