NSN 3020-01-436-8744 · NIIN 014368744 · FSC 3020
NO DASHES 3020014368744
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Application: W/S WASP CLASS LHD
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGAV | END ITEM IDENTIFICATION | W/S WASP CLASS LHD |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 8.0000 |
| AJLA | TEETH QUANTITY | 64 |
| ANTP | BORE STYLE | |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | AXIALLY THROUGH HUB SECOND END UNIFIED NATIONAL COARSE (UNC) |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | AXIALLY THROUGH HUB SECOND END INCHES 0.375 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | AXIALLY THROUGH HUB SECOND END THREADED 2 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 8.250 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | BOTH ENDS INCHES 2.250 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.250 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.250 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.249 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.752 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 2.750 |
| MATT | MATERIAL | OVERALL BRONZE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE AST- B584-C86200 |
| STYL | STYLE DESIGNATOR |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| C554AP005 | 98523 |
| H554AP001 FIND NO. 4 | 98523 |
| 117404 | 98523 |
| H554AP001 | 98523 |