NSN 3020-01-719-5620 · NIIN 017195620 · FSC 3020
NO DASHES 3020017195620
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Application: ANCHOR AND ANCHOR CHAIN SECURING MECHANISM ASSEMBLY; W/S:LOS AGENLES CLASS SSN (688)
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 4.500 |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.190 |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | TRANSVERSELY THROUGH HUB SECOND END INCHES 0.190 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | GEAR, SPUR, DRIVE |
| CXRX | HUB SPLINE QUANTITY | 2 |
| CXRX | HUB SPLINE QUANTITY | 3 |
| CXRY | HUB SPLINE NOMINAL MAJOR DIAMETER | BOTH ENDS INCHES 3.000 |
| MATT | MATERIAL | OVERALL NICKEL ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-N-281, CLASS A, CONDITION CONDHF, F--1 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR | |
| AJLA | TEETH QUANTITY | 36 |
| ANTP | BORE STYLE | |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | AXIALLY THROUGH HUB SECOND END UNIFIED NATIONAL COARSE (UNC) |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | AXIALLY THROUGH HUB SECOND END INCHES 0.250 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | AXIALLY THROUGH BODY SECOND END THREADED 1 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END PLAIN 1 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB SECOND END PLAIN 1 |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | AXIALLY THROUGH HUB SECOND END INCHES 0.250 |
| AGAV | END ITEM IDENTIFICATION | ANCHOR AND ANCHOR CHAIN SECURING MECHANISM ASSEMBLY; W/S:LOS AGENLES CLASS SSN (688) |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 6.250 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 3.500 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.0 |
| CWRS | BORE NOMINAL DIAMETER | SECOND END INCHES 2.500 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 14.5 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 4.750 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 581-8838021-6 | 53711 |
| 581-8838021 | 53711 |
| LSA003518-6 | 96169 |
| R61111404-6 | 96169 |