NSN 3020-01-273-4784 · NIIN 012734784 · FSC 3020
NO DASHES 3020012734784
In Stock
PULLEY,FLAT
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHE | OUTSIDE DIAMETER | INCHES NOMINAL 1.620 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.010 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.620 |
| ABPS | FIRST STEP LENGTH | AA END INCHES NOMINAL 0.050 |
| ABPU | SECOND STEP LENGTH | AA END INCHES NOMINAL 0.250 |
| AGGP | DRILLED HOLE DIAMETER | INCHES NOMINAL 0.159 |
| AHSF | FLANGE QUANTITY | 2 |
| AHYF | SECURING HOLE QUANTITY | 3 |
| ALNC | HUB OUTSIDE DIAMETER | AA END INCHES NOMINAL 1.200 AND INCHES NOMINAL 1.313 |
| AQPL | FACE WIDTH | INCHES NOMINAL 0.660 |
| ARJD | DESIGN FORM | WEBBED |
| BFYT | HOLE LOCATION | 2ND END,0.850 IN. LG |
| BSNP | SECURING METHOD | DRILLED HOLE |
| BXSU | WEB/SPOKE CONFIGURATION TO FACE CENTERLINE | OFFSET |
| BYDP | RIM TYPE | SOLID |
| BYDR | FLANGE LOCATION | INSIDE AND OUTSIDE |
| BYDZ | PROTRUDING HUB CHARACTERISTIC | STEPPED |
| BYFF | SECURING LOCATION | BB END |
| BYZH | DISTANCE FROM OUTSIDE FLANGE/RIM TO HUB END | AA END INCHES NOMINAL 0.300 |
| BYZL | FIRST STEP FACE LARGEST DIAMETER AND LOCATION | INCHES NOMINAL AA END 1.313 |
| CLYS | DISTANCE FROM OUTSIDE FLANGE/RIM TO HUB END AND LOCATION | INCHES NOMINAL AA END 0.300 |
| FEAT | SPECIAL FEATURES | 60 DEG WEDGE CUT FROM OUTER EDGE TO CENTER,0.190 R AT POINT;2 TAP DRILLED HOLES IN WEDE SIDE 0.330 IN. DEEP,CSK 82 DEGX0.157 IN. DIA,0.138-32 UNC 2BX0.220 MIN. FULL THREAD |
| SFTT | SURFACE TREATMENT | ANODIZE |
| STYL | STYLE DESIGNATOR |