NSN 3030-01-264-1740 · NIIN 012641740 · FSC 3030
NO DASHES 3030012641740
In Stock
BELT,POSITIVE DRIVE
Belting, Drive Belts, Fan Belts, and Accessories
Technical characteristics
7 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKGN | DRIVE TYPE AND QUANTITY | TEETH 75 |
| AKGQ | NOMINAL PITCH DISTANCE | INCHES 0.081 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BELT DRIVE |
| FEAT | SPECIAL FEATURES | SHAPE: THE BELT SHALL BE AN ENDLESS LOOP WITH TEETH AND BODY MOLDED OVER FABRIC CORD; THERE SHALL BE NO DISCERNABLE SEAMS OR JOIN MARKS |
| MATT | MATERIAL | CABLE PLASTIC POLYESTER |
| SPCL | SPECIAL TEST FEATURES | MINIMUM PULLEY DIAMETER: 0.26" (10 TEETH); INSTALLED BELT TENSION (NOMINAL): 6.75LBS; POLYESTER CORD USED IN THE BELTS SHALL BE TESTED AS FOLLOWS: BREAK STRENGTH PER ASTM D-2256; ELONGATION PER ASTM D-2256; TWIST PER ASTM D-1423; BODY OF BELT, INCLUDING THE TEETH, SHALL BE MOLDED IN AN ENDLES BET FROM POLYESTER PLASTIC MEETING THE REQUIREMENTS OF ASTM-638 |
| SUPP | SUPPLEMENTARY FEATURES | PITCH (TOOTH-TO-TOOTH): 0.0816" + OR - 0.002"; PITCH LENGTH: 6.120" + OR - 0.030"; BELT THICKNESS: 0.046" + OR - 0.010"; WIDTH: 0.187" + OR - 0.015"; TENSILE STRENGTH: 85LBS; TEMPERATURE RANGE: -40 DEGREES CELSIUS TO 90 DEGREES CELSIUS |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| A6R6-0750180 | 59076 |
| 75TX3/1640DP | 76157 |
| A3034799 | 80063 |