NSN 3010-00-807-3763 · NIIN 008073763 · FSC 3010
NO DASHES 3010008073763
In Stock
GEARCASE-MOTOR
Torque Converters and Speed Changers
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BFMF | COOLING METHOD | AIR TO AIR COOLED |
| AXFH | SPLINE LENGTH | SINGLE END INCHES NOMINAL 0.9530 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 120.0 |
| CWDY | TEMP RATING | OPERATING CELSIUS -17.8 AND OPERATING CELSIUS 65.6 AND AMBIENT CELSIUS 21.1 |
| AKPS | DUTY CYCLE | CONTINUOUS |
| AAJV | OVERALL WIDTH | INCHES 3.687 |
| AAJT | OVERALL HEIGHT | INCHES 2.875 |
| AAJU | OVERALL LENGTH | INCHES 3.375 |
| BKPP | SPEED CONTROL METHOD AND DEVICE TYPE | ELECTRICAL HANDWHEEL |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXCP | WINDING TYPE | INDUCTION-SPLIT PHASE |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | SINGLE END OFFSET RIGHT PARALLEL TO SHAFT AXIS |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 3.312 |
| CWGL | CURRENT RATING IN AMPS | OUTPUT SINGLE 0.090 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 0.204 AND INCHES MAXIMUM 0.205 |
| AXGY | MOUNTING METHOD | FLANGE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 2 |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.532 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 4 |
| ACDC | CURRENT TYPE | INPUT AC |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | SINGLE END SINGLE REVOLUTIONS PER MINUTE 54.000 |
| CWHR | ANGLE OF SHAFT TO MOUNTING BASE | SINGLE END DEGREES 90.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A1 |
| FAAZ | PHASE | INPUT SINGLE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| BKPB | CURRENT RATING METHOD | NO LOAD |
| BKPH | TORQUE RATING AND TYPE | INCH-OUNCES STALLED 4.25 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END COUNTERCLOCKWISE |
Supersedes
This item replaces cancelled NIINs 005002385 · 008545599 · 008714095 · 008756124. An older drawing citing one of those numbers resolves here.