NSN 3040-00-014-0313 · NIIN 000140313 · FSC 3040
NO DASHES 3040000140313
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAHP | SECOND END STYLE | |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 0.6430 AND INCHES MAXIMUM 0.6500 |
| AMDM | FIRST END SPLINE LENGTH | INCHES MINIMUM 0.895 AND INCHES MAXIMUM 0.905 |
| AMDN | FIRST END SPLINE MINOR DIAMETER | INCHES MINIMUM 0.5260 AND INCHES MAXIMUM 0.5360 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.680 |
| BDSR | SECOND END SPLINE QUANTITY | 16 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMDS | FIRST END PITCH DIAMETER | INCHES NOMINAL 0.6000 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 0.8620 AND INCHES MAXIMUM 0.8670 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 1.010 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES MINIMUM 0.7070 AND INCHES MAXIMUM 0.7170 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.8620 AND INCHES MAXIMUM 0.8670 |
| AMGE | SECOND END PRESSURE ANGLE | DEGREES NOMINAL 30.0000 |
| AMGF | SECOND END PITCH DIAMETER | INCHES NOMINAL 0.8000 |
| ATPC | STEP QUANTITY | 4 |
| BDSQ | FIRST END SPLINE QUANTITY | 12 |
| AAGZ | FIRST END STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MFR REF SINGLE MATERIAL RESPONSE VICKERS VS1-1-2-1 |
| CSYM | SURFACE FINISH | MICROINCHES 16.0 |
| MATT | MATERIAL | STEEL |
| AMDR | FIRST END PRESSURE ANGLE | DEGREES NOMINAL 30.0000 |
| CSPY | LARGEST STEP DIAMETER | INCHES MINIMUM 0.862 AND INCHES MAXIMUM 0.867 |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.6430 AND INCHES MAXIMUM 0.6500 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 609047 | 62983 |