NSN 3040-00-033-5815 · NIIN 000335815 · FSC 3040
NO DASHES 3040000335815
In Stock
WORM SHAFT
Miscellaneous Power Transmission Equipment
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 20.875 |
| BYFR | TEETH HARDNESS RATING | CALE,41 TO 45 |
| CFFB | WORM THREAD QUANTITY | 3 |
| CFFC | WORM THREAD LEAD | INCHES NOMINAL 2.2323 |
| CFFD | WORM THREAD DIRECTION | RIGHT-HAND |
| CFFF | WORM PRESSURE ANGLE IN DEG | 24.217 |
| CFFG | WORM HELIX ANGLE | 15 DEG 8 MIN 47.10 SEC |
| CFFK | WORM OUTSIDE DIAMETER | INCHES MINIMUM 2.998 AND INCHES MAXIMUM 3.000 |
| CFFL | WORM PITCH DIAMETER | INCHES NOMINAL 2.625 |
| CFFM | SHAFT HARDNESS RATING | CALE,41 TO 45 |
| CFFN | WORM THREAD SECTION LENGTH | INCHES NOMINAL 4.250 |
| CFFP | WORM BODY LENGTH | INCHES NOMINAL 20.875 |
| CFFW | SHAFT LOCATION | BOTH ENDS OF WORM |
| CFFX | STRAIGHT UNTHREADED LENGTH | FIRST END FIRST PORTION INCHES NOMINAL 3.125 |
| CFFX | STRAIGHT UNTHREADED LENGTH | FIRST END SECOND PORTION INCHES NOMINAL 1.063 |
| CFFX | STRAIGHT UNTHREADED LENGTH | FIRST END THIRD PORTION INCHES NOMINAL 0.813 |
| CFFX | STRAIGHT UNTHREADED LENGTH | SECOND END FIRST PORTION INCHES NOMINAL 3.250 |
| CFFX | STRAIGHT UNTHREADED LENGTH | SECOND END SECOND PORTION INCHES NOMINAL 1.750 |
| CFFX | STRAIGHT UNTHREADED LENGTH | SECOND END THIRD PORTION INCHES NOMINAL 4.438 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | FIRST END FIRST PORTION INCHES NOMINAL 2.125 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | FIRST END SECOND PORTION INCHES MINIMUM 1.5749 AND INCHES MAXIMUM 1.5753 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | FIRST END THIRD PORTION INCHES MINIMUM 1.499 AND INCHES MAXIMUM 1.500 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END FIRST PORTION INCHES NOMINAL 2.125 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END SECOND PORTION INCHES MINIMUM 1.5749 AND INCHES MAXIMUM 1.5753 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END THIRD PORTION INCHES MINIMUM 1.485 AND INCHES MAXIMUM 1.495 |
| CFFZ | UNTHREADED SECTION KEYWAY WIDTH | SECOND END THIRD PORTION INCHES MINIMUM 0.3700 AND INCHES MAXIMUM 0.3720 |
| CFGB | UNTHREADED SECTION KEYWAY DEPTH | SECOND END THIRD PORTION INCHES NOMINAL 0.188 |
| CFGJ | INVOLUTE SPLINE QUANTITY | 16 |
| CFGK | INVOLUTE SPLINE PRESSURE ANGLE IN DEG | 25.0 |
| CFGL | INVOLUTE SPLINE PITCH DIAMETER | FIRST END FOURTH PORTION INCHES NOMINAL 1.3330 |
| CFGM | INVOLUTE SPLINE LENGTH | FIRST END FOURTH PORTION INCHES NOMINAL 2.188 |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MFR REF SINGLE MATERIAL RESPONSE B50R214,CLASS D,GENERAL ELECTRIC CO |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 288C720 | 24446 |
| 288C720-1 | 81893 |
| 288C720 | 81893 |
| 2886720-001 | 01289 |
| 288C720-001 | 01289 |
| 28867730-001 | 03502 |
| 288C720-001 | 03502 |