NSN 3040-00-039-8406 · NIIN 000398406 · FSC 3040
NO DASHES 3040000398406
In Stock
WORM SHAFT
Miscellaneous Power Transmission Equipment
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 4.250 |
| CFFB | WORM THREAD QUANTITY | 8 |
| CFFC | WORM THREAD LEAD | INCHES NOMINAL 0.0982 |
| CFFD | WORM THREAD DIRECTION | RIGHT-HAND |
| CFFF | WORM PRESSURE ANGLE IN DEG | 14.500 |
| CFFG | WORM HELIX ANGLE | 3 DEG,34 MIN |
| CFFK | WORM OUTSIDE DIAMETER | INCHES NOMINAL 0.562 |
| CFFL | WORM PITCH DIAMETER | INCHES NOMINAL 0.500 |
| CFFN | WORM THREAD SECTION LENGTH | INCHES NOMINAL 0.813 |
| CFFP | WORM BODY LENGTH | INCHES NOMINAL 0.906 |
| CFFW | SHAFT LOCATION | BOTH ENDS OF WORM |
| CFFX | STRAIGHT UNTHREADED LENGTH | FIRST END FIRST PORTION INCHES NOMINAL 1.506 |
| CFFX | STRAIGHT UNTHREADED LENGTH | SECOND END FIRST PORTION INCHES MINIMUM 1.845 AND INCHES MAXIMUM 1.851 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | FIRST END FIRST PORTION INCHES MINIMUM 0.3743 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | FIRST END SECOND PORTION INCHES MAXIMUM 0.3748 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END FIRST PORTION INCHES NOMINAL 0.365 |
| CFGC | UNTHREADED SECTION PIN HOLE DIAMETER | SECOND END FIRST PORTION INCHES MINIMUM 0.1562 |
| CFGC | UNTHREADED SECTION PIN HOLE DIAMETER | SECOND END SECOND PORTION INCHES MAXIMUM 0.1567 |
| MATT | MATERIAL | STEEL |
| ZZZV | FSC APPLICATION DATA | TURRET ELECTRICAL CONTROL,COMBAT VEHICLE |