NSN 3040-00-068-7273 · NIIN 000687273 · FSC 3040
NO DASHES 3040000687273
In Stock
SHAFT,STRAIGHT
Miscellaneous Power Transmission Equipment
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | INCHES NOMINAL 1.730 |
| AMGS | SECOND END HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.0880 AND INCHES MAXIMUM 0.0930 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 0.3123 AND INCHES MAXIMUM 0.3125 |
| AAGZ | FIRST END STYLE | |
| AMDX | FIRST END HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.1120 AND INCHES MAXIMUM 0.1170 |
| AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | INCHES NOMINAL 0.190 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-S-764,COND A |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 0.3123 AND INCHES MAXIMUM 0.3125 |
| MATT | MATERIAL | STEEL COMP 416 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.960 |
| AMHD | SECOND END HOLE DEPTH | INCHES NOMINAL 0.312 |
| AMHP | SECOND END INTERNAL THREAD LENGTH | INCHES NOMINAL 0.380 |
| CSYM | SURFACE FINISH | MICROINCHES 32.0 |
| FEAT | SPECIAL FEATURES | FIRST END,ADDITIONAL CROSS DRILLED HOLE,0.088 INCH MINIMUM 0.093 INCH MAXIMUM DIAMETER,DISTANCE BETWEEN HOLE CENTERS 1.220 INCH NOMINAL,ANGLE BETWEEN HOLES 180 DEGREES |