NSN 3040-00-101-7779 · NIIN 001017779 · FSC 3040
NO DASHES 3040001017779
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AMGE | SECOND END PRESSURE ANGLE | DEGREES NOMINAL 30.0000 |
| AMGF | SECOND END PITCH DIAMETER | INCHES NOMINAL 0.3125 |
| ATPC | STEP QUANTITY | 5 |
| BDSR | SECOND END SPLINE QUANTITY | 10 |
| CSPY | LARGEST STEP DIAMETER | INCHES MINIMUM 0.745 AND INCHES MAXIMUM 0.750 |
| CSYM | SURFACE FINISH | MICROINCHES 32.0 |
| AAGZ | FIRST END STYLE | |
| AAHG | FIRST END GROOVE WIDTH | INCHES NOMINAL 0.1250 |
| AAHH | FIRST END GROOVE DIAMETER | INCHES MINIMUM 0.4250 AND INCHES MAXIMUM 0.4300 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.210 |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | INCHES NOMINAL 0.090 |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 0.4689 AND INCHES MAXIMUM 0.4692 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 0.3408 AND INCHES MAXIMUM 0.3438 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 0.484 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES MINIMUM 0.2629 AND INCHES MAXIMUM 0.2710 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.3408 AND INCHES MAXIMUM 0.3438 |
| FEAT | SPECIAL FEATURES | INTERNAL SPLINE FIRST END,0.578 IN. LG,12 TEETH,0.3438 IN. AND 0.3453 IN. MINOR DIA,0.4165 IN. AND 0.4246 IN. MAJOR DIA,PITCH DIAMETER 0.3750 IN.,PRESSURE ANGLE 30 DEG |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 5643 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 66917 | 93835 |