NSN 3040-00-173-0081 · NIIN 001730081 · FSC 3040
NO DASHES 3040001730081
In Stock
COLLAR,SHAFT
Miscellaneous Power Transmission Equipment
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 3.500 |
| ABLM | INTERNAL KEYWAY WIDTH | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.251 |
| ABNM | THICKNESS | INCHES NOMINAL 1.219 |
| ABPH | SMALL END DIAMETER | INCHES NOMINAL 2.188 |
| ABQS | COUNTERSUNK HOLE ANGLE IN DEG | 60.0 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 1.5300 AND INCHES MAXIMUM 1.5310 |
| AEUZ | LARGEST DIAMETER LENGTH | INCHES NOMINAL 0.344 |
| AEVE | KEYWAY QUANTITY | 1 |
| AEVF | DISTANCE FROM CENTER OF BORE TO BOTTOM OF KEYWAY | INCHES MINIMUM 0.902 AND INCHES MAXIMUM 0.911 |
| AHYF | SECURING HOLE QUANTITY | 6 |
| AHYG | ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 60.0 |
| CQJX | NOMINAL THREAD SIZE | ALL HOLES INCHES 0.312 |
| CQKB | SECURING HOLE TYPE AND LOCATION | THREADED-COUNTERSUNK ALL HOLES |
| CSFB | COUNTERSINK MAJOR DIAMETER AND LOCATION | INCHES NOMINAL ALL HOLES 0.3438 |
| FEAT | SPECIAL FEATURES | LIP ON STEP END 0.188IN. WIDE AND 2.247 IN. MIN2.250 IN. MAX DIA |
| MATT | MATERIAL | STEEL |
| STYL | STYLE DESIGNATOR |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 003582845. An older drawing citing one of those numbers resolves here.