NSN 3040-00-321-8730 · NIIN 003218730 · FSC 3040
NO DASHES 3040003218730
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | |
| AMFR | SECOND END KEYWAY WIDTH | INCHES MINIMUM 0.1250 AND INCHES MAXIMUM 0.1260 |
| AMHP | SECOND END INTERNAL THREAD LENGTH | INCHES NOMINAL 0.625 |
| ABKZ | EXTERNAL KEYWAY LENGTH | SECOND END INCHES MINIMUM 1.635 AND INCHES MAXIMUM 1.650 |
| AMDJ | FIRST END TONGUE THICKNESS | INCHES MINIMUM 0.3095 AND INCHES MAXIMUM 0.3105 |
| AMDK | FIRST END TONGUE WIDTH | INCHES MINIMUM 0.806 AND INCHES MAXIMUM 0.807 |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 0.8060 AND INCHES MAXIMUM 0.8070 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC 1ST MATERIAL RESPONSE QQ-S-624,FS3135 OR FED SPEC 2ND MATERIAL RESPONSE QQ-S-624 OR FED SPEC 3RD MATERIAL RESPONSE QQ-S-624 |
| AMFT | SECOND END KEYWAY DEPTH | INCHES MINIMUM 0.064 AND INCHES MAXIMUM 0.074 |
| ATPC | STEP QUANTITY | 6 |
| CSPY | LARGEST STEP DIAMETER | INCHES NOMINAL 0.807 |
| CSQZ | FIRST END STEP LENGTH | INCHES NOMINAL 0.312 |
| CSYM | SURFACE FINISH | MICROINCHES 32.0 |
| MATT | MATERIAL | STEEL OR STEEL COMP 3140 OR STEEL COMP 8740 |
| ZZZV | FSC APPLICATION DATA | PUMP,FUEL INJECTION,ENGINE,EXCEPT AIRCRAFT AND GUIDED MISSILE PRIME MOVING |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 5.033 AND INCHES MAXIMUM 5.043 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 0.6855 AND INCHES MAXIMUM 0.6860 |
| AAHP | SECOND END STYLE |