NSN 3040-00-454-6039 · NIIN 004546039 · FSC 3040
NO DASHES 3040004546039
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BDSQ | FIRST END SPLINE QUANTITY | 15 |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | INCHES NOMINAL 1.000 |
| ATPC | STEP QUANTITY | 2 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 4.375 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES MINIMUM 1.4290 AND INCHES MAXIMUM 1.4800 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES MINIMUM 1.7420 AND INCHES MAXIMUM 1.7440 |
| AMGS | SECOND END HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.3750 AND INCHES MAXIMUM 0.3820 |
| AMDS | FIRST END PITCH DIAMETER | INCHES NOMINAL 0.5000 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 1.7420 AND INCHES MAXIMUM 1.7440 |
| BDSR | SECOND END SPLINE QUANTITY | 6 |
| CSPY | LARGEST STEP DIAMETER | INCHES NOMINAL 1.925 |
| CSYM | SURFACE FINISH | MICROINCHES 125.0 |
| MATT | MATERIAL | STEEL |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | INCHES NOMINAL 1.9250 |
| AMDR | FIRST END PRESSURE ANGLE | DEGREES NOMINAL 30.0 |
| AMDN | FIRST END SPLINE MINOR DIAMETER | INCHES NOMINAL 1.9200 |
| AMDM | FIRST END SPLINE LENGTH | INCHES NOMINAL 1.625 |
| AAGZ | FIRST END STYLE | |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 28.750 |
| AMDL | FIRST END DIAMETER | INCHES NOMINAL 1.9250 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 46433 | 45320 |