NSN 3040-00-491-6317 · NIIN 004916317 · FSC 3040
NO DASHES 3040004916317
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSQZ | FIRST END STEP LENGTH | INCHES NOMINAL 0.500 |
| MATT | MATERIAL | STEEL COMP 9310 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 6260 |
| ATPC | STEP QUANTITY | 3 |
| ACKY | FIRST END WIDTH ACROSS FLATS | INCHES MINIMUM 0.243 AND INCHES MAXIMUM 0.245 |
| AMDL | FIRST END DIAMETER | INCHES NOMINAL 0.4500 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 0.4450 AND INCHES MAXIMUM 0.4500 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 0.312 |
| BDSR | SECOND END SPLINE QUANTITY | 8 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.4450 AND INCHES MAXIMUM 0.4500 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.852 AND INCHES MAXIMUM 2.854 |
| CSYM | SURFACE FINISH | MICROINCHES 90.0 |
| AMGE | SECOND END PRESSURE ANGLE | DEGREES NOMINAL 30.0 |
| AMGF | SECOND END PITCH DIAMETER | INCHES NOMINAL 0.4000 |
| AAHP | SECOND END STYLE | |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES MINIMUM 0.2900 AND INCHES MAXIMUM 0.3000 |
| CSPY | LARGEST STEP DIAMETER | INCHES NOMINAL 0.450 |
| AAGZ | FIRST END STYLE |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 65355-12122-103 | 27033 |
| 65355-12122-101 | 67309 |
| 65355-12122-101 | 78286 |
| 65355-12122-103 | 78286 |
| 65355-12122-102 | 78286 |
| 65355-12122-103 | 11371 |