NSN 3040-00-528-1713 · NIIN 005281713 · FSC 3040
NO DASHES 3040005281713
In Stock
SHAFT ASSEMBLY,FLEXIBLE
Miscellaneous Power Transmission Equipment
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGJS | PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.250 |
| SCSZ | CROSS SECTION SIZE | DIAMETER BOTH ENDS INCHES NOMINAL 0.250 |
| ABSA | SPLINE QUANTITY | 12 |
| ASDB | WIDTH ACROSS FLATS | BOTH ENDS INCHES NOMINAL 0.750 |
| AXFH | SPLINE LENGTH | BOTH ENDS INCHES NOMINAL 0.250 |
| AKMH | CORE DIAMETER | INCHES NOMINAL 0.150 |
| ANQR | PROTECTIVE COATING METHOD | CASING COATED |
| SFTT | SURFACE TREATMENT | CASING ZINC |
| ZZZV | FSC APPLICATION DATA | MISCELLANEOUS ACFT ACCESSORIES AND COMPONENTS |
| AGJR | MINOR DIAMETER | SPLINE BOTH ENDS INCHES NOMINAL 0.156 |
| AWZY | END CONNECTION TYPE | BOTH ENDS THREADED INTERNAL |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 14.5 |
| AAJD | THREAD CLASS | 3A |
| AEDN | TIP LENGTH | BOTH ENDS INCHES NOMINAL 0.500 |
| AGGZ | SHANK OUTSIDE DIAMETER | BOTH ENDS INCHES NOMINAL 0.406 |
| APJC | THREAD LOCATION | BOTH ENDS INTERNAL |
| APTD | END TYPE | BOTH ENDS ROUND, INTERNAL SPLINED |
| AAUJ | SPLINE MAJOR DIAMETER | BOTH ENDS INCHES NOMINAL 0.258 |
| MATT | MATERIAL | CORE STEEL |
| AXYS | SPLINE TYPE | BOTH ENDS INVOLUTE |
| BPPL | WRENCHING FACILITY TYPE | BOTH ENDS HEXAGON |
| CFRM | TORSIONAL DEFLECTION RATING | 6 DEG FT-LB IN. |
| CFRP | CASING LENGTH BETWEEN FERRULES | INCHES NOMINAL 93.500 |
| CFRQ | CASING OUTSIDE DIAMETER | INCHES NOMINAL 0.258 |
| CFRZ | CORE OVERALL LENGTH | INCHES NOMINAL 94.500 |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| CFSL | CORE REMOVABILITY | NONREMOVABLE |
| CGDN | MINIMUM OPERATING RADIUS | INCHES 3.500 |
| MATT | MATERIAL | CASING STEEL |
| AAJF | THREAD DIRECTION | BOTH ENDS RIGHT-HAND |
| AASA | THREAD LENGTH | BOTH ENDS INCHES NOMINAL 0.312 |
| CFRW | END OVERALL DIAMETER | BOTH ENDS INCHES NOMINAL 0.875 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 94.500 |
| ABKU | FLANGE THICKNESS | BOTH ENDS INCHES NOMINAL 0.062 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | BOTH ENDS UNS |
| AGPX | SHOULDER OUTSIDE DIAMETER | BOTH ENDS INCHES NOMINAL 0.562 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7404Y0A941-2 | 94756 |
| 7404Y0A94 1-2 | 97945 |
| 7404Y0A | 97945 |
| 7404Y0A9408 | 97945 |
| 7404Y0A9408 | 0KZS2 |
| 7404Y0A | 0KZS2 |
| 7404Y0A94 1-2 | 0KZS2 |
Supersedes
This item replaces cancelled NIINs 007248807 · 007930537. An older drawing citing one of those numbers resolves here.