NSN 3040-00-593-7760 · NIIN 005937760 · FSC 3040
NO DASHES 3040005937760
In Stock
WORM SHAFT
Miscellaneous Power Transmission Equipment
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CFFL | WORM PITCH DIAMETER | INCHES NOMINAL 0.2175 |
| CFFM | SHAFT HARDNESS RATING | LOCATION NOT OTHERWISE SPECIFIED ROCKWELL C MINIMUM 23.0 AND ROCKWELL C MAXIMUM 31.0 |
| CFFP | WORM BODY LENGTH | INCHES NOMINAL 0.312 |
| CFFW | SHAFT LOCATION | BOTH ENDS OF WORM |
| CFFX | STRAIGHT UNTHREADED LENGTH | FIRST END FIRST PORTION INCHES NOMINAL 0.094 |
| CFFF | WORM PRESSURE ANGLE IN DEG | 30.000 |
| CFFG | WORM HELIX ANGLE | 4 DEG 11 MIN 5 SEC |
| CFFK | WORM OUTSIDE DIAMETER | INCHES NOMINAL 0.249 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.156 |
| BYFR | TEETH HARDNESS RATING | ROCKWELL C MINIMUM 23.0 AND ROCKWELL C MAXIMUM 31.0 |
| CFFB | WORM THREAD QUANTITY | 1 |
| CFFC | WORM THREAD LEAD | INCHES NOMINAL 0.050 |
| CFFD | WORM THREAD DIRECTION | RIGHT-HAND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-16232 TYE 1 |
| CFFX | STRAIGHT UNTHREADED LENGTH | SECOND END FIRST PORTION INCHES NOMINAL 0.406 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END FIRST PORTION INCHES MINIMUM 0.155 AND INCHES MAXIMUM 0.156 |
| MATT | MATERIAL | STEEL |
| SFTT | SURFACE TREATMENT | PHOSPHATE MANGANESE |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | FIRST END FIRST PORTION INCHES MINIMUM 0.146 AND INCHES MAXIMUM 0.156 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | FIRST END FOURTH PORTION INCHES NOMINAL 0.375 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | FIRST END SECOND PORTION INCHES MINIMUM 0.279 AND INCHES MAXIMUM 0.280 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | FIRST END THIRD PORTION INCHES NOMINAL 0.250 |
| CFFX | STRAIGHT UNTHREADED LENGTH | FIRST END SECOND PORTION INCHES NOMINAL 0.125 |
| CFFX | STRAIGHT UNTHREADED LENGTH | FIRST END FOURTH PORTION INCHES NOMINAL 0.188 |
| CFFX | STRAIGHT UNTHREADED LENGTH | FIRST END THIRD PORTION INCHES NOMINAL 0.031 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 1325303 | 10001 |